Tell Your Need
Mini Premade Pouch Packaging Machine uses a magnetic levitation servo motor as a drive unit, which can be used to produce three-side sealed bags, stand-up bags/stand-up bags, zipper bags, box bags, and open bags.
The machine uses 3-time or 4-time bag-out technology, and can choose three-column or four-column operation mode. Each machine cycle can produce three or four bags at the same time, and the speed can reach 320 bags/minute.
The equipment can choose servo screw metering, servo plunger pump metering, gravity flow meter metering and other metering methods. The equipment uses an independent cabinet, an independent 15-inch operation panel, and a standard Inovance control system. Allan Bradley or Beckhoff can also be selected.
1. The machine stops running when the safety key interlock switch is pulled out;
2. No bag prompting function;
3. Self-diagnosis function of open the bag failed (The bag can be reused); In that case, the machine will not fill and seal, it will re-take the bag;
4. Positioning (anti-dropping) function of hopper;
5. Warning function of cartridge heater fault;
6. Warning function of cylinder fault.
7. Easy to operate and easy to replace the bag / The machine is suitable for a variety of bag types;
8. Low maintenance cost / Modular replacement of the parts;
|
Model |
TRC-200 |
TRC-300 |
TRC-430 |
|
speed |
0-26bags / min |
6-15 bags / min |
6-15 bags / min |
|
Bag size |
Bag width: 70mm ≤ W ≤ 150 mm Bag length: 100mm ≤ length ≤ 200 mm |
Bag width: 90mm ≤ W ≤ 300 mm Bag length: 100mm ≤ length ≤ 300 mm |
Bag width: 100mm ≤ W ≤ 300 mm Bag length: 100mm ≤ length ≤ 430 mm |
|
Air consumption |
0.2m3 / min 0.65Mpa,1kw |
0.5m3 / min 0.65Mpa; |
0.5m3 / min 0.65Mpa; |
|
Machine dimension |
L: 1080mm * W:535mm *H: 1010mm |
L: 1750mm * W:510mm *H: 1300mm |
L: 1750mm * W:510mm *H: 1650mm |
| model |
HMK4200FET |
HMK4200FEQ |
|
| Minimum bag size |
60×120 |
60×120 |
|
| Maximum bag size |
140×250 |
105×250 |
|
| Bag volume range |
600ml |
250ml |
|
| Production speed ppm |
240 |
320 |
|
| Film size range | Maximum diameter 500 mm, core diameter 76 or 152 mm | ||
| Power consumption of equipment |
25Kw |
25Kw |
|
